Smart-UPS 3000VA LCD RM 2U 120V
SMT3000RM2U Features
StruxureWare Central compatible: Enables centralized management via StruxureWare Central.
Predicitive failure notification: Provides early-warning fault analysis ensuring proactive component replacement.
Sine wave output: Eliminates humming and heat generated when powering tubelights and fans.
LED Indicators: Provide easy-to-read status of the unit and utility power conditions.
Boost and Trim Automatic Voltage Regulation (AVR): Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress.
Serial connectivity: Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks.
Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Energy meter: Provides actual kilowatt hours of usage for energy conscious users.
Predictive replace battery date: Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
Intuitive LCD interface: Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
Single switched outlet group: Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
Pure sine wave output on battery: Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Disconnected battery notification: Warns when a battery is not available to provide backup power.
Sequenced network shutdown and reboot: Customize network shutdown and reboot sequence of connected servers and UPSs.
Outlet group control: Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).
Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Adjustable voltage-transfer points: Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Audible alarms: Provides notification of changing utility power and UPS power conditions
Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Network manageable: Provides remote power management of the UPS over the network.
Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Serial connectivity: Provides management of the UPS via a serial port.
Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
USB connectivity: Provides management of the UPS via a USB port (not available on all models).
User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
Output
Output Power Capacity: 2700 Watts / 2880 VA
Max Configurable Power: 2700 Watts / 2880 VA
Nominal Output Voltage: 120V
Output Voltage Distortion: Less than 5%
Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
Topology: Line Interactive
Waveform Type: Sine wave
Output Connections:
| (6) NEMA 5-15R |
|
| (2) NEMA 5-20R |
|
Input
Nominal Input Voltage: 120V
Input Frequency: 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections:
| NEMA L5-30P |
|
Cord Length: 2.44 meters
Input voltage range for main operations: 82 - 144V
Input voltage adjustable range for mains operation: 75 - 154V
Batteries & Runtime
Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time: 3 hour(s)
Replacement Battery: RBC43
RBC™ Quantity: 1
Communications & Management
Interface Port(s): USB
Available SmartSlot™ Interface Quantity: 1
Control panel: LED status display with On Line : On Battery : Replace Battery and Overload indicators, Multi-function LCD status and control console
Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge Protection and Filtering
Surge energy rating : 459 Joules
No reviews found