APC 350VA UPS (BE350G)
BE350G Features
Simple battery replacement: Increases UPS availability by allowing quick, easy battery replacement.
Disconnected battery notification: Warns when a battery is not available to provide backup power.
Cold-start capable: Provides temporary battery power when the utility power is out.
Dataline surge protection: Provides protection of connected equipment from power surges on the data lines.
Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Lifetime data recovery warranty: Provides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit.
Transformer-block spaced outlets: Protect equipment with input transformer blocks without blocking access to other receptacles.
Building Wiring Fault Indicator: This LED informs users of potentially dangerous wiring problems in the wall circuit.
Back-UPS Features & Benefits
Protection:
Battery and surge protected outlets: Back up and protect your hardware and data during power outages, surges and spikes.
Surge only outlets: Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Availability:
Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
Output
Output Power Capacity: 200 Watts / 350 VA
Max Configurable Power: 200 Watts / 350 VA
Nominal Output Voltage: 120V
Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
Topology: Standby
Waveform Type: Stepped approximation to a sinewave
Output Connections:
| (3) NEMA 5-15R (Battery Backup) |
|
| (3) NEMA 5-15R (Surge Protection) |
|
Input
Nominal Input Voltage: 120V
Input Frequency: 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections:
| NEMA 5-15P |
|
Cord Length: 1.52 meters
Input voltage range for main operations: 88 - 139V
Batteries & Runtime
Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time: 16 hour(s)
Replacement Battery: RBC35
RBC™ Quantity: 1
Communications & Management
Control panel: LED status display with On Line : On Battery : Replace Battery and Building Wiring Fault
Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge Protection and Filtering
Surge energy rating: 365 Joules
Filtering: Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449
Data Line Protection: RJ45 10/100 Base-T Ethernet protection
No reviews found